How can we help you?
Frequently asked questions
- extend the straight sides of your surface (black lines) until the lines cross.
Example: Place a sheet of paper under the table and push it to the edge of the table. Now two sides of the sheet should be straight against two sides of the tabletop and you can measure the distance.
- Now measure the distance, starting from the point where the curve of your table begins, to the point where the two black lines cross. The measured dimension is the radius.
Important: If the lengths of the two lines are different, please send us both measurements before placing an order online.
Each order is made individually for you. We usually need 3-4 days for the production.
Please find further information here.
Public holidays: There may be minor delays in shipping between public holidays.
You can choose between the following payment methods:
– Credit Card / Debit Card
High gloss & fine matt table foil
Difference between the high-gloss and the fine matt table foil
High-gloss table protector: The table protector is transparent on the top and bottom (smooth surface).
High-gloss, lacquered and smooth surfaces as well as glass, granite and marble surfaces may be visually impaired by air bubbles between the table foil and the surface. (see example picture below)
Fine matt table protector: The fine matt table protector is matt on both sides.
This table foil can be used on all surfaces; no air bubbles are formed here.
(Glass table with high gloss table foil on the left and fine matt table foil on the right)
Table foil too long?
Depending on the size, something is added to the length during production to counteract the shrinking process.
So if your protective film may be a little longer than ordered at the beginning. It will shrink a little in the beginning time . This process can take up to 4 weeks.
Cleaning the table foil
You can clean the table foil with normal household cleaning agents.
Stubborn stains are best removed with a little sunflower oil or acetone-free nail polish remover.
Real wood table
The table foil must not be placed on plastic tables because parts of the table foil migrate into the table surface due to the plasticiser migration and can no longer be washed off.
Magazines or newspapers
We ask you not to place magazines or newspapers on the table foil for the first few weeks, as these can otherwise stain the table foil and are difficult to remove. As a rule, the stains can be removed with a little butter. After approx. 2-3 weeks, the effect is no longer as bad as it was in the beginning.
Our table foil is suitable for contact with food.
In the first few days, people who are sensitive to odours may notice a PVC smell, but this will dissipate after a few days. To speed up the process, we recommend cleaning the film with vinegar water and placing it in a well-ventilated place.
Please note that the table protector is not suitable for permanent outdoor use. Moisture between table foil and surface as well as direct sunlight 86°F shorten the lifetime of the table protector. UV stabilization counteracts the aging process, but it cannot be completely prevented.
Film thickness: 2mm
Service temperature: -13°F to +104° F
Fire behaviour: Does not burn or smoulder
Shore A hardness: 59 ± 3